"
Weight 28 lbs. (13 kg)
Height 12“ (31 cm)
Diameter
Discharge
Inlet Flange
Solid Handling 4" (10 cm)
Hose Ports
Pump Body
Impeller/Screw
Suction Case
Elastometers
Hydraulic Oil
Input Flow Minimum 1 GPM (4 LPM)
Operating Pressure Max. 3000 PSI (204 Bar)
Power Source Any Open Center Hydraulic System
Engine
Horse Power
Hydraulic Output
Oil Filtration
Oil Reservoir Capacity
Fuel Tank Capacity
Fuel Consumption
Dimensions
full specs

The slurry gate flow diverter is a hydraulically operated diverter gate that is used to redirect discharge flow in the area of the pump to promote mixing of solids into pumpable slurry. When the solids are in suspension the gate is closed to allow the mixture to be pumped to the desired location.